Connecting with your computer using an USB cable
Use the included USB cable to hook up the MW10 mixing desk with your computer to transfer stereo audio data in both ways - from the mixing desk to the computer and vice versa - via the USB connection (with either 44.1 kHz or 48 kHz sampling frequency).
No special drivers needed
Since the MW10 system uses the standard drivers of your computer's operating system you don't have install and worry about special drivers, software packages, etc.
DAW-Software Cubase LE included
Get a comprehensive tabletop studio setup with the included software Cubase LE - instant high-level harddisk recording.
3-band-EQ on each channel
Each channel of the MW10 mixing desk is equipped with a 3-band-equalizer which bands are set to fit musical needs.
Features of the mixing desk
With up to four mic/line-inputs or up to four stereo inputs you have plenty of spcae to hook up your devices: microphones, line-level devices, stereo synthesizers and more. For instance you can connect two microphones and four stereo-devices or four microphones and two stereo-devices.
48V phantom power
The PHANTOM switch supplies the microphone inputs of the mixing desk with 48 V phantom power. So you can use your professional condensator microphones with the MW10 to achieve the professional recording quality you deserve.
|
